We use cookies to ensure that we can provide you with the best experience on our website. By using our website, you are consenting to the use of cookies as set out in our policy. OK
Show Prices Inc VAT
Help
MURATA POWER SOLUTIONS / New Products & Samples
  • Sign up for our Newsletter

Introducing Radial Inductors for Power & Filtering Applications from Murata Power Solutions

Murata Power Solutions have an extensive range of competitively priced Radial leaded inductors that are ideal for power and EMI filtering applications.
14/01/2022
View

Introducing Murata Power Solutions DCA5-20PC Panel Meters and precision base-mounted current shunts

Murata Power Solutions DCA5-20PC Series dc ammeters are specifically designed to display the output of all popular 50mV and 100mV dc-shunts. 25 input ranges provide for precision measurement of dc currents from 1A to 2000A.
10/05/2019
View

Introducing the MGJ2 series of DC-DC converters for Gate Drive applications from Murata

The MGJ2 series from Murata Power Solutions are 2 Watt DC-DC converters featuring high isolation with dual outputs housed in a compact form factor through hole package.
13/02/2019
View

Introducing the MGJ2/3/6 series of DC-DC converters suitable for 'high/low' side IGBT drive applications from Murata

The MGJ2, 3 and 6 series from Murata Power Solutions are 2, 3 and 6 Watt DC-DC converters featuring high isolation with a choice of dual (MGJ2) and configurable triple (MGJ3/6) outputs housed in compact form factors.
01/11/2018
View

Murata 1 W DC-DC converter 35 percent smaller height profile and 50 percent lower price

Murata has announced the NXE1 series of low cost 1 Watt DC-DC converters from Murata Power Solutions. Measuring only 12.7 x 10.4 x 4.8 mm these ultra compact converters have a profile at least 35% lower than the 7 mm height industry norm.
19/10/2018
View

6 Watt DC-DC converter optimized for IGBT, SiC, and MOSFET gate drive applications from Murata, samples available from Anglia

Murata has announced new additions to their MGJ6 series of isolated 6 Watt dual output DC-DC converters from Murata Power Solutions.
20/03/2017
View

Murata introduces the DMR20 Self-powered LED Digital Panel Frequency Monitors

Murata have announced the release of the third generation of the DMR20 series of round, miniature digital panel frequency monitors. Designed to measure and display AC mains frequencies.
27/01/2017
View

Two-Watt DC-DC converter from Murata has 50% lower profile than industry norm

Murata has announced the NXE2 series of 2 Watt surface mounted DC/DC converters. Footprint compatible with similar 1 and 2 Watt devices available on the market,the NXE2 series provides more power output in the same space.
12/05/2016
View

Introducing the NXJ1 series of 1 Watt surface mount DC-DC converters certified for medical use

Murata has introduced the NXJ1, a series of single output, high reliability, high isolation, 1W surface-mount DC-DC converters designed for medical products, with other applications in industrial, transport, and telecom markets.
25/11/2015
View

Murata extends PAH half-brick series

Murata has announced the expansion of the PAH series "half-brick" DC-DC power converters from Murata Power Solutions: the PAH-28/12.5-D24 model.
14/09/2015
View

Configurable output voltage, high isolation DC/DC converters for IGBT and MOSFET gate drive applications

Murata has announced the MGJ3 and MGJ6 series of configurable output voltage, high isolation DC/DC converters. These 3 and 6 Watt surface mounted devices are optimized for use as high-side and low-side gate drivers in IGBT and MOSFET bridge circuits.
31/08/2015
View

Murata introduces digital 40 Amp 132 Watt PoL DC-DC Converter

The OKD series of non-isolated point-of-load (PoL) DC/DC converters from Murata Power Solutions is available in three different package formats: through-hole, single-in-line, and surface mount.
16/01/2015
View

MurataPS MGJ2 series of 2 Watt high isolation dual output DC/DC converters

The MGJ2 series of 2 Watt high isolation dual output DC/DC converters are compact encapsulated devices, suitable for powering "high side" and "low side" gate drives in bridge circuits using insulated-gate bipolar transistors (IGBTs) and MOSFETs.
29/08/2014
View

6 Watt encapsulated DC-DC converter from Murata Power Solutions meets medical safety standard

The NCM6 series of isolated 6 Watt single and dual output DC-DC converters accommodates an ultra-wide 4:1 input range.
05/08/2014
View

Murata adopts Powervation's Digital Control Architecture for latest 25A PoL DC-DC converter

The DOSA compatible OKLF 25A PoL has been designed to address the industry's growing requirement for low voltages (1.25V and less), increased current and power densities, fast transient response times and the need for a tightly regulated DC output voltage
05/03/2014
View

Power Block modules from Murata Power Solutions provide an alternate power system design approach

The OKLP-X/25-W12-C is the first in a series of Power Blocks designed to provide the power system architect with an alternative design approach for non- isolated DC-DC conversion.
16/01/2014
View

400W quarter brick bus converter from MurataPS delivers ultra high efficiencies

The new RBQ series provides the industry's highest efficiencies of up to 96% from a standard DOSA compliant quarter-brick package and is designed to operate in most applications with convection cooling.
03/12/2013
View

Compact 1 Watt DC-DC converter from MurataPS complies with UL60601-1 for medical safety

The MEJ1 is a series of isolated 1 Watt DC-DC converters encapsulated in a 7 pin SIP package.
29/10/2013
View

Ultra wide 8:1 input range DC-DC converter released by MurataPS

The UCR100 series of DC-DC converters are specifically designed for power conversion and battery applications. The UCR units offer customers ease of installation and better energy efficiency ratings than comparable models.
15/07/2013
View

MurataPS introduces 15W DC-DC converter with 10:1 input range

The RUW15 series of 15W ultra-wide, single output isolated DC/DC converters is designed for transportation and industrial applications where the input voltage may vary widely and a hold-up capability is required.
01/07/2013
View

New safety approved DC-DC converter from MurataPS delivers extended power rating

The new safety approved MEJ2 is a fully encapsulated compact through-hole 2 Watt DC/DC converter. The series provides a pin-compatible upgrade path from Murata's NMJ, MEV1 and NMV series.
22/05/2013
View

New medically approved 400W AC-DC Converter from MurataPS offers high efficiency and convection cooling

Offering industry leading 400 Watts of power packaged in a standard 1U open-frame format, the MVAC400 series accommodates the universal AC input voltage range from 90 to 264 VAC with active power factor correction (PFC) and active inrush protection.
02/05/2013
View

MurataPS releases 100 Watt DC-DC converter in 1/16 brick package

Murata Power Solutions has announced the ULS series of 100 Watt fully regulated DC-DC converters designed for use in distributed or intermediate bus power architectures where board space and efficiency are top priorities.
22/04/2013
View

New 1.5A miniature SIP DC/DC converter from MurataPS offers improved flexibility for designers

Murata Power Solutions has announced the introduction of the OKR-T/1.5-W12-C, a 1.5A DC/DC converter that provides an ideal solution for designs that require low load current with limited board space.
12/02/2013
View

New single output isolated 1W DC-DC converter from MurataPS offers leading efficiency and load regulation

Available in a variety of popular input/output voltages, the MEE1 series is ideally suited for providing local supplies on control system boards with the added benefit of 1kVDC galvanic isolation to reduce switching noise.
23/11/2012
View

Ultra-miniature 1W DC/DC converter from MurataPS now available with dual outputs

The dual output (MTU1D) versions now allow designers even more performance flexibility, in half the footprint of the previous industry-standard package.
01/11/2012
View

162W 54Vout half-brick power module from MurataPS suits PoE applications

Murata Power Solutions has announced the EMH-54/3-Q48N-C power module designed specifically for Power-over-Ethernet (PoE) applications.
17/10/2012
View

MurataPS introduces the industry's first DOSA compliant 1/32 ''brick'' 30W DC/DC converter series

Murata Power Solutions has announced the ULT series of isolated 30 Watt DC/DC converters assembled in a miniature open frame package, measuring just 19.1 x 23.4 x 8.9 mm, and available with either a through-hole or surface mount option.
10/02/2012
View

Markets

Audio, Broadcast, Video & Imaging
Building & Home Automation
Computers & Embedded Computing
Harsh Environments and HiRel
Healthcare & Medical
Industrial
Instrumentation, Measurement & Monitoring
Internet of Things
Lighting
Security
Wearables
Wireless & Communication

Resources

Anglia Ready Reels
Events & Exhibitions
EzySamples
Linecard
Literature & Technical Guides
Product Focuses

My Account

Login
Register
Open a Credit Account
Link existing Credit Account
Delivery & Shipping
My Marketing Preferences
Subscribe to our Newsletter

Company Information

About Us
Corporate Brochure
Quality Policy & ISO Certifications
Become a supplier

Contact & Support

Customer Relations & UK Sales:
+44 (0)1945 47 47 47
Contact Us

Follow us:


Accepted Credit Cards
Maximum card transaction £2000
ANGLIA-LIVE.COM IS A B2B WEBSITE ONLY
© 2024 Anglia Components Plc. All rights reservedTerms & ConditionsTerms of UsePrivacy PolicyAnti Bribery Statement