The new SEK001 Sensor Evaluation Kit from Honeywell allows designers to quickly obtain and capture readings from Honeywell sensors thus greatly speeding up development time. The sensor evaluation kit is compatible with a range of Honeywell sensors including the TruStability™ RSC Series and digital versions (SPI or I²C) of the HSC Series and SSC Series Board Mount Pressure Sensors.
The SEK001 Sensor Evaluation Kit interfaces with an Arduino™ Uno Microcontroller Board and Honeywell software, the sensor to be evaluated is then simply mounted into the relevant socket on the SEK001 evaluation kit and the readings are displayed on the PC screen without the need to develop code.
The sensor readings may also be recorded to a .csv file for further analysis, and, in the case of the RSC Series, used in the equations found in the RSC Series datasheet. In addition to being mounted directly on the SEK001, the sensor may also be remotely connected to the SEK001 via wire leads, allowing the sensor to be tested in adverse environments, or in a prototype product for proof of concept testing.
Honeywell have also provided free software to control the Arduino™ Uno Microcontroller Board to take readings from the sensor which is downloadable at http://sensing.honeywell.com/sensors/evaluation-kit
Typical configuration
The SEK001 kit provides a simple, quick and cost-effective method for designers to perform a thorough evaluation on a range of Honeywell sensors without having to spend time developing code before sensor readings can be captured. The kit can also serve as a useful prototype or proof-of-concept platform in the customers target end application further speeding up time to market.
Honeywell have also released the SEK002 Evaluation Kit which can be used to evaluate the ABP Series (digital versions only) and MPR Series Board Mount Pressure Sensors; Honeywell HumidIcon™ Digital Humidity/Temperature Sensors: HIH6100 Series, HIH6000 Series, HIH7000 Series, HIH8000 Series, HIH9000 Series and HPM Series Particle Sensors. Click here to learn more about the SEK002 and to register for a FREE Evaluation Kit.
Anglia are offering customers a FREE SEK001 Sensor Evaluation Kit from Honeywell and a FREE Arduino™ Uno Microcontroller Board, please fill in the form below to register your interest now.
Free samples are subject to availability.
STMicroelectronics are powering the next generation of Industry 4.0 applications with a new vibration-sensing solution optimized to enable smart maintenance of factory equipment. The IIS3DWB is a system-in-package MEMS sensor featuring a 3-axis digital vibration sensor with low noise over an ultra-wide and flat frequency range. The wide bandwidth, low noise, very stable and repeatable sensitivity, together with the capability of operating over an extended temperature range (up to +105 °C), make the device particularly suitable for vibration monitoring in industrial applications.
Power management company Eaton has introduced the C308F Bussmann Series of fast-acting, ceramic tube fuses for intrinsic safety requirements used in hazardous environments such as network barriers and other equipment used in mines, oil drilling structures, gas stations, gas meters, chemical refineries and hazardous material transportation...
Gemalto’s suite of Cinterion® EHS6T 3G Smart Terminals takes M2M simplicity to a whole new level, leveraging Gemalto’s next-generation Java® embedded technology...
Open standards and a huge ecosystem of freely available tools and code were a key ingredient in the growth and success of Java and the wildly creative Java developer community. Gemalto is moving this concept forward for the embedded space with the Cinterion Concept Board...
Gemalto’s Cinterion® EHS6T 3G Smart LAN Terminal takes M2M simplicity to a whole new level, leveraging Gemalto’s next-generation Java® embedded technology, plug-and-play solutions are powered by a five-band HSPA+ baseband engine enabling high-speed, secure wireless TCP/IP connectivity for a variety of industrial applications...
The Cinterion® Connect Shield is an easy-to-use maker board, based on the ELS61-E LTE Cat.1 cellular module, that combines the flexible and widely used Arduino open source platform with Gemalto’s reliable and highly efficient cellular connectivity...
Gemalto, the world leader in digital security, is expanding Industrial IoT connectivity with a significant breakthrough in wireless engineering – the industry's first IoT module to provide global connectivity on 12 LTE bands plus, global 3G and global 2G cellular coverage all from a single device...