The ADL5580 from Analog Devices is a high performance, single-ended or differential amplifier with 10 dB of voltage gain optimized for applications spanning from dc to 10.0 GHz.
The ADL5580 amplifier offers a low referred to input (RTI) noise spectral density (NSD) of 2.24 nV/√Hz (at 1000 MHz) and is optimized for distortion performance over a wide frequency range, making the device for driving high speed 12-bit to 16-bit analog-to-digital converters (ADCs). The ADL5580 is suited for use in high performance, zero intermediate frequency (IF), and complex IF receiver designs. In addition, this device has low distortion for single-ended input driver applications.
Functional Block Diagram
By using two external series resistors, the gain selection of the ADL5580 can be modified from 10 dB for a differential input to a lower gain. The device maintains low distortion through its output common-mode voltage (VCM) of 0.5 V, providing a flexible capability for driving ADCs with full-scale levels up to 1.4 V p-p.
Operating from a +5 V and −1.8 V supply, the positive and negative supply current of the ADL5580 is typically +276 mA and −224 mA, respectively. The device has a power disable feature, and when disabled, the amplifier consumes just 2 mA.
Click below for an overview of the ADL5580 key features
The ADL5580 is optimized for wideband, low distortion, and low noise operation at the dc to 10.0 GHz frequency range. These attributes, together with its adjustable gain capability, make this device an optimal choice for driving a wide variety of ADCs, mixers, pin diode attenuators, surface acoustic wave (SAW) filters, and a multiplicity of discrete RF devices.
The ADL5580 is fabricated on Analog Devices high speed silicon germanium (SiGe) process, the device is supplied in a compact 4 mm × 4 mm, 20-terminal land grid array (LGA) package and operates over the −40°C to +85°C temperature range.
Evaluation Board
Design support is provided by the ADL5580-EVALZ evaluation board, this board enables developers to evaluate all the key features of the device and allows complete manual control of the ADL5580 through the USB port on a Windows® PC. The ADL5580-EVALZ evaluation board connects to the SDP-S interface board for quick evaluation of the ADL5580.
The ADL5580-EVALZ can be configured over the USB from a panel within the ACE software.
The ADL5580 fully differential ADC driver is suitable for use in Military and Test Instrumentation applications.
Anglia are offering customers a FREE evaluation board and samples of the ADL5580 Fully Differential 10 GHz ADC Driver from Analog Devices, please fill in the form below to register your interest now.
Free samples are subject to availability.
STMicroelectronics are powering the next generation of Industry 4.0 applications with a new vibration-sensing solution optimized to enable smart maintenance of factory equipment. The IIS3DWB is a system-in-package MEMS sensor featuring a 3-axis digital vibration sensor with low noise over an ultra-wide and flat frequency range. The wide bandwidth, low noise, very stable and repeatable sensitivity, together with the capability of operating over an extended temperature range (up to +105 °C), make the device particularly suitable for vibration monitoring in industrial applications.
Power management company Eaton has introduced the C308F Bussmann Series of fast-acting, ceramic tube fuses for intrinsic safety requirements used in hazardous environments such as network barriers and other equipment used in mines, oil drilling structures, gas stations, gas meters, chemical refineries and hazardous material transportation...
Gemalto’s suite of Cinterion® EHS6T 3G Smart Terminals takes M2M simplicity to a whole new level, leveraging Gemalto’s next-generation Java® embedded technology...
Open standards and a huge ecosystem of freely available tools and code were a key ingredient in the growth and success of Java and the wildly creative Java developer community. Gemalto is moving this concept forward for the embedded space with the Cinterion Concept Board...
Gemalto’s Cinterion® EHS6T 3G Smart LAN Terminal takes M2M simplicity to a whole new level, leveraging Gemalto’s next-generation Java® embedded technology, plug-and-play solutions are powered by a five-band HSPA+ baseband engine enabling high-speed, secure wireless TCP/IP connectivity for a variety of industrial applications...
The Cinterion® Connect Shield is an easy-to-use maker board, based on the ELS61-E LTE Cat.1 cellular module, that combines the flexible and widely used Arduino open source platform with Gemalto’s reliable and highly efficient cellular connectivity...
Gemalto, the world leader in digital security, is expanding Industrial IoT connectivity with a significant breakthrough in wireless engineering – the industry's first IoT module to provide global connectivity on 12 LTE bands plus, global 3G and global 2G cellular coverage all from a single device...