Stanley Electric have released the ZEUBE265 series of 265nm peak wavelength UVC LEDs which are proving very effective in the fight against SARS-CoV-2, the virus that causes COVID-19. It has long been known that UVC light can achieve a reliable anti-bactericidal effect simply by irradiating with UV rays, it can also disinfect pathogenic micro-organisms that cause infectious diseases and health problems in the human body and is effective against various bacteria and viruses including COVID-19.
Stanley Electric have conducted testing on the ZEUBE265 series of 265nm UVC LEDs in cooperation with the Yamaguchi-University by Dr. Daisuke Hayasaka and Dr. Hiroshi Shimoda. As a result of this evaluation test, Stanley Electric has confirmed high effectiveness of virus inactivation (inability to multiply) of SARS-CoV-2 using their 265nm UVC LED.
Summary of test result:
This 3rd party evaluation concluded that exposing Viruses and Bacteria with Stanley Electrics unique 265nm wavelength deep UVC LEDs proved more effective at inactivating Coronavirus than other wavelengths
The ZEUBE265 series of 265nm peak wavelength UVC LEDs are also highly effective against a wide range of other viruses and bacteria as the below chart demonstrates.
Estimated time required for 99.9% disinfection (Irradiation under the same conditions with a 265nm UV LED)
The ZEUBE265 series UVC LEDs are manufactured using Stanley Electric’s own integrated production system that covers every stage of UVC LED production, from semiconductor substrate growth to LED packaging. This in-house capability gives many advantages including highly stable quality control, higher production yields allowing better performance products with lower cost.
The ZEUBE265 series 265nm UVC LEDs are available in 4 power outputs, 25mW, 30mW, 35mW and 50mW, the LED’s are housed in a compact, hermetically sealed 3.6x3.6x2.24mm package which protects against damage caused by humidity. Constructed using a ceramic substrate material, the LEDs have a low thermal resistance offering superior performance and are suitable for high drive currents. The LEDs have wide spatial distribution of 120° enabling good area coverage.
ZEUBE265 series UVC LED Construction
The ZEUBE265 series UVC LED’s are suitable for a wide range of applications including Water purifiers, Waste treatment equipment, Water dispensers, Surface disinfection, Medical instrument disinfection, Food processing machines, Disinfection lighting, Air purifiers, HVAC and Ozone concentration meters.
Stanley Electric have also made available a range of ZEUBE265 series LEDs pre-mounted on aluminium PCB’s complete with connectors and lead-wires, these evaluation boards allow engineers to quickly develop prototypes for testing helping to speed up time to market.
Anglia are offering customers a FREE evaluation board and samples of the ZEUBE265 series 265nm UVC LED from Stanley Electric, please fill in the form below to register your interest now.
UV LEDs emit high intensity ultraviolet light. Do not look directly into the UV light source during operation; this can be harmful to your eyes and skin. Wear protective eyewear to avoid exposure to UV light, as well as protective masks and gloves, etc. in order not to expose your skin to the light. Take the same measures against leak light and reflected light.
FREE samples for UK and Ireland customers only, subject to availability.
STMicroelectronics are powering the next generation of Industry 4.0 applications with a new vibration-sensing solution optimized to enable smart maintenance of factory equipment. The IIS3DWB is a system-in-package MEMS sensor featuring a 3-axis digital vibration sensor with low noise over an ultra-wide and flat frequency range. The wide bandwidth, low noise, very stable and repeatable sensitivity, together with the capability of operating over an extended temperature range (up to +105 °C), make the device particularly suitable for vibration monitoring in industrial applications.
Power management company Eaton has introduced the C308F Bussmann Series of
fast-acting, ceramic tube fuses for intrinsic safety requirements used in
hazardous environments such as network barriers and other equipment used in mines,
oil drilling structures, gas stations, gas meters, chemical refineries and hazardous
Gemalto’s suite of Cinterion® EHS6T 3G Smart Terminals takes M2M
simplicity to a whole new level, leveraging Gemalto’s next-generation
Java® embedded technology...
Open standards and a huge ecosystem of freely available tools and code were a key
ingredient in the growth and success of Java and the wildly creative Java developer
community. Gemalto is moving this concept forward for the embedded space with the
Cinterion Concept Board...
Gemalto’s Cinterion® EHS6T 3G Smart LAN Terminal takes M2M simplicity to a whole
new level, leveraging Gemalto’s next-generation Java® embedded technology,
plug-and-play solutions are powered by a five-band HSPA+ baseband engine enabling
high-speed, secure wireless TCP/IP connectivity for a variety of industrial
The Cinterion® Connect Shield is an easy-to-use maker board, based on the ELS61-E
LTE Cat.1 cellular module, that combines the flexible and widely used Arduino open source
platform with Gemalto’s reliable and highly efficient cellular connectivity...
Gemalto, the world leader in digital security, is expanding Industrial IoT connectivity with a
significant breakthrough in wireless engineering – the industry's first IoT module to provide global connectivity on 12 LTE bands plus, global 3G and global 2G cellular coverage all from a