The new advanced ST25DV dynamic-tag ICs from STMicroelectronics are the latest addition to the ST25 NFC/RFID product family that come with a rich featured contactless RF interface and I2C bus. The dual-interface enables untethered interaction between an NFC-capable smartphone or an RFID reader and the host microcontroller located inside near-by equipment, such as smart meters, IoT devices, professional, or consumer products.
The ST25DV series dynamic NFC/RFID tag ICs with dual interface uniquely support data exchange with extended communication range enabling “in the box programming” of electronic equipment at the point of production, as well as Fast Transfer Mode operation for software updates in the field with the help of any NFC-enabled mobile device. The ST25DV dynamic tags are compatible with any existing ISO 15693 RFID infrastructure, with no additional investment required.
The ST25DV series supports the NFC Type 5 and ISO 15693 RFID specifications, delivering the strongest features of each. It includes native NFC NDEF message support, and ISO 15693 long-range RF connectivity with Fast Transfer mode enabled by a large 256-Byte buffer. Available in 4Kbit and 16Kbit densities the range also features the market’s highest EEPROM density of 64Kbits with multiple 64-bit passwords to offer enhanced data-protection capabilities.
The devices are tailored for industrial applications, with high write-cycle endurance of one million cycles at 25°C and 40-years data retention. They operate over a wide I2C supply-voltage range of 1.8V-5.5V, and consume minimal energy in all modes including the sub-1µA standby mode allowing use in power-conscious or battery-operated devices. They can also offer energy-harvesting capabilities that make them the ideal solution for zero-power applications.
To assist engineers designing applications utilising the ST25DV series Advanced Dynamic NFC/RFID Tag ICs, STMicroelectronics have made available the ST25DV-DISCOVERY which is a demonstration kit to evaluate the features and capabilities of the ST25DV series. It is based on the NFC ST25DV04K device embedded on a daughter card using a Class 1 antenna and a STM32 processor driving a mother board. A dedicated software stored in the Flash memory is provided.
The ST25DX_Discovery_Mboard is available in two versions. The demonstration edition includes all of the standard edition features with Wi-Fi®, and BLE (Bluetooth Low Energy) modules to demonstrate various connectivity use cases. The standard edition is used to achieve the demonstration edition features. The ST25DV04K Class 1 antenna daughter card, included in the kit, can be replaced by Class 5 or Class 6 antennas. For this purpose an ST25DV antennas bundle is available from STMicroelectronics. The boards are powered through the USB connectors and full schematics, gerber files, bill of materials, drivers and firmware are also available from STMicroelectronics.
Anglia are offering customers a FREE ST25DV-Discovery kit for the ST25DV Dynamic NFC/RFID tag ICs from STMicroelectronics, please fill in the form below to register your interest now.
ST25DV Series
ST25DV-DISCOVERY - Two ready-to-use printed circuit boards (PCB):
Free samples are subject to availability.
STMicroelectronics are powering the next generation of Industry 4.0 applications with a new vibration-sensing solution optimized to enable smart maintenance of factory equipment. The IIS3DWB is a system-in-package MEMS sensor featuring a 3-axis digital vibration sensor with low noise over an ultra-wide and flat frequency range. The wide bandwidth, low noise, very stable and repeatable sensitivity, together with the capability of operating over an extended temperature range (up to +105 °C), make the device particularly suitable for vibration monitoring in industrial applications.
Power management company Eaton has introduced the C308F Bussmann Series of fast-acting, ceramic tube fuses for intrinsic safety requirements used in hazardous environments such as network barriers and other equipment used in mines, oil drilling structures, gas stations, gas meters, chemical refineries and hazardous material transportation...
Gemalto’s suite of Cinterion® EHS6T 3G Smart Terminals takes M2M simplicity to a whole new level, leveraging Gemalto’s next-generation Java® embedded technology...
Open standards and a huge ecosystem of freely available tools and code were a key ingredient in the growth and success of Java and the wildly creative Java developer community. Gemalto is moving this concept forward for the embedded space with the Cinterion Concept Board...
Gemalto’s Cinterion® EHS6T 3G Smart LAN Terminal takes M2M simplicity to a whole new level, leveraging Gemalto’s next-generation Java® embedded technology, plug-and-play solutions are powered by a five-band HSPA+ baseband engine enabling high-speed, secure wireless TCP/IP connectivity for a variety of industrial applications...
The Cinterion® Connect Shield is an easy-to-use maker board, based on the ELS61-E LTE Cat.1 cellular module, that combines the flexible and widely used Arduino open source platform with Gemalto’s reliable and highly efficient cellular connectivity...
Gemalto, the world leader in digital security, is expanding Industrial IoT connectivity with a significant breakthrough in wireless engineering – the industry's first IoT module to provide global connectivity on 12 LTE bands plus, global 3G and global 2G cellular coverage all from a single device...